• Kohler Co. provides one-source responsibility for the generating system and accessories.
• The generator set and its components are prototype-tested, factory-built, and production-tested.
• The 60 Hz generator set offers a UL 2200 listing.
• The generator set accepts rated load in one step.
• The 60 Hz generator set meets NFPA 110, Level 1, when equipped with the necessary accessories and installed per NFPA standards.
• The generator set complies with ISO 8528-5, Class G3, requirements for transient performance.
• The 60 Hz generator set engine is certified by the Environmental Protection Agency (EPA) to conform to Tier 2 nonroad emissions regulations.
• A one-year limited warranty covers all systems and components. Two-, five-, and ten-year extended warranties are also available.

Alternator features:

• The brushless, rotating-field alternator has broad range reconnectability.
• The pilot-excited, permanent-magnet (PM) alternator provides superior short-circuit capability.
• NEMA MG1 ,IEEE, and ANSI standards compliance for temperature rise and motor starting.
• Sustained short-circuit current of up to 300% of the rated current for up to 10 seconds.
• Sustained short-circuit current enabling down stream circuit breakers to trip without collapsing the alternator field.
• Self-ventilated and dripproof construction.
• Superior voltage waveform from a two-thirds pitch stator and skewed rotor.
• Digital solid-state, volts-per-hertz voltage regulator with ±0.25% no-load to full-load regulation.
• Brushless alternator with brushless pilot exciter for excellent load response.

Other features:

• Controllers are available for all applications.
• The generator set is direct-mounted to the skid.
• Electronic engine controls manage the engine.

Prime Ratings:		1850 kW (2313 kVa)
Standby Ratings:		2100 kW (2625 kVa)
Hertz:		60 Hz
Alternator Type:		Brushless, Permanent-Magnet
EPA Tier Level:		2
Engine Manufacturer:		Detroit Diesel/MTU
Engine Model:		16V4000 G43 T163-8A36
Cylinder Arrangement:		16-V
Max Power at Rated RPM:		2280 kWm (3058 BHP)
Prime Fuel Consumption at
100% load:		488.9 Lph (129.2 gph)
75% load:		382.8 Lph (101.1 gph)
50% load:		265.9 Lph (70.2 gph)
25% load:		153.2 Lph (40.5 gph)
Standby Fuel Consumption at
100% load:		559.9 Lph (147.9 gph)
75% load:		428 Lph (113.1 gph)
50% load:		300.1 Lph (79.3 gph)
25% load:		170.9 Lph (45.2 gph)