• Kohler Co. provides one-source responsibility for the generating system and accessories.
• The generator set and its components are prototype-tested, factory-built, and production-tested.
• The 60 Hz generator set offers a UL 2200 listing.
• The generator set accepts rated load in one step.
• The 60 Hz generator set meets NFPA 110, Level 1, when equipped with the necessary accessories and installed per NFPA standards.
• The generator set complies with ISO 8528-5, Class G3, requirements for transient performance.
• The 60 Hz generator set engine is certified by the Environmental Protection Agency (EPA) to conform to Tier 2 nonroad emissions regulations.
• A one-year limited warranty covers all systems and components. Two-, five-, and ten-year extended warranties are also available.

Alternator features:

• The brushless, rotating-field alternator has broad range reconnectability.
• The pilot-excited, permanent-magnet (PM) alternator provides superior short-circuit capability.
• NEMA MG1 ,IEEE, and ANSI standards compliance for temperature rise and motor starting.
• Sustained short-circuit current of up to 300% of the rated current for up to 10 seconds.
• Sustained short-circuit current enabling down stream circuit breakers to trip without collapsing the alternator field.
• Self-ventilated and dripproof construction.
• Superior voltage waveform from a two-thirds pitch stator and skewed rotor.
• Digital solid-state, volts-per-hertz voltage regulator with ±0.25% no-load to full-load regulation.
• Brushless alternator with brushless pilot exciter for excellent load response.

Other features:

• Controllers are available for all applications.
• The generator set is direct-mounted to the skid.
• Electronic engine controls manage the engine.

Prime Ratings:		1620 kW (2025 kVa)
Standby Ratings:		1780 kW (2225 kVa)
Hertz:		60 Hz
Alternator Type:		Brushless, Permanent-Magnet
EPA Tier Level:		2
Engine Manufacturer:		Detroit Diesel/MTU
Engine Model:		12V4000 G83 T123-8A36
Cylinder Arrangement:		12-V
Max Power at Rated RPM:		1910 kWm (2561 BHP)
Prime Fuel Consumption at
100% load:		422.2 Lph (111.5 gph)
75% load:		324.3 Lph (85.7 gph)
50% load:		226.5 Lph (59.8 gph)
25% load:		130.1 Lph (34.4 gph)
Standby Fuel Consumption at
100% load:		469 Lph (123.9 gph)
75% load:		353.5 Lph (93.4 gph)
50% load:		245.8 Lph (64.9 gph)
25% load:		140.4 Lph (37.1 gph)